High Low Temperature Test Chamber Operation Manual For Hydraulic Hose
Test Chamber Product Introduction
This is the operation manual for the GDW-100 high-low temperature test chamber, a professional test equipment for hydraulic hose OEM solutions.
The manual standardizes the full operation process of the high-low temperature test chamber, covering pre-test preparation, sample placement, temperature parameter setting, test operation, post-test inspection and shutdown. It ensures the standardization of equipment operation, the accuracy of test data, and the daily maintenance of the equipment, which is an essential technical document for hydraulic hose manufacturers to conduct temperature resistance tests and quality inspection, verifying the performance of hoses under extreme high and low temperature conditions.
Test Chamber Product Advantages
Standardized Operation: Standardizes the full operation process of the high-low temperature test chamber, avoiding operational errors and ensuring test data accuracy.
Temperature Resistance Verification: Specialized for hydraulic hose temperature resistance test, effectively verifying the performance of hoses under extreme high and low temperature conditions.
Quality Control Support: Provides a standardized operation basis for hydraulic hose factory quality inspection, ensuring that hose products meet international temperature resistance standards.
Comprehensive Post-Test Inspection: Clearly specifies post-test visual inspection and pressure verification requirements, ensuring the reliability of test results.
Easy to Implement: Clear step-by-step instructions, easy for laboratory technicians to master and implement.
Test Chamber Operating Steps
1.Connect the power supply, close the circuit breaker, turn on the power button, and set the equipment status identification card to "Running" status
2.Place the test samples into the test chamber and close the chamber door
3.The display shows the monitoring screen, set the required temperature according to test requirements (e.g., constant temperature test), input the test temperature, click run to start the test
4.When the test time is reached, click to stop the test, turn off the power, remove the samples. The inner and outer rubber of the hose should be free of cracks. After returning to room temperature, conduct a verification pressure test, and the samples should be free of leakage or cracks
5.After the work is completed, turn off the power supply
Quality Control
Certificate
Related Product
Material Support
Product Tags:
|
|
Manual Hydraulic Hose Testing Equipment High Low Temperature Test Chamber Operation Images
|
